(877) NIS-4PDS
INTERCEPTOR™ Network Integrity Systems
 

INTERCEPTOR™ Optical Network Security System For Dark Fiber Monitoring

INTERCEPTOR™ Optical Network Security System incorporates patented technology to monitor dark fibers in optical networks for physical intrusion into the cable or cable pathway and to ensure the availability of the network. A single INTERCEPTOR port can provide protection for an entire continuous cable-run.  The monitored fibers are looped back at the far end of the cable-run to return the monitoring signal to the INTERCEPTOR.

 



» INTERCEPTOR Product Brochure (PDF)
» Frequently Asked Questions
» What Information is Needed to Specify an INTERCEPTOR for My Network (PDF)
» INTERCEPTOR™ Optical Network Security System Models and Part Numbers


What is Dark Fiber Monitoring?
Dark Fiber refers to "unlit" fiber in a cable, or fiber that is unused; perhaps dedicated for future growth or as spares in case of fiber damage. When unused fibers are present in a cable, it can be economically beneficial and technically viable to monitor a few of those fibers rather than the active fibers. If ingress into the cable or cable pathway is attempted, the protected dark fibers will sense the disturbance and issue an alarm. The effectiveness of this is dependent upon the design of the optical cable itself. Some cable designs require monitoring on more dark fibers than others.

When To Monitor Dark Fibers
   • When spare fibers are available in the cable and it is unlikely that they will ever be made active
   • When economic factors are important (to minimize cost)
   • When it is not required that the data path be interrupted when an intrusion event is detected
   • When the threat level affords that not every active fiber in the cable be monitored

Typical Dark Fiber Installation


» INTERCEPTOR Product Brochure (PDF)
» Frequently Asked Questions
» What Information is Needed to Specify an INTERCEPTOR for My Network (PDF)
» INTERCEPTOR™ Optical Network Security System Models and Part Numbers

TECHNICAL SPECIFICATIONS

Electrical
Power Input
100/240V,250mA
60/50Hz IEC
3 Position Connector

Environmental
Operating Temperature
32° to 113°F (0° to 45°C)
Storage Temperature
14° to 140°F (-10° to -50°C)
Operating Humidity Range
20% to 80% Non-Condensing

Physical
Dimensions
1U High, 19" Rack Mountable

H x W x D: 45 x 432 x 368mm

H x W x D: 1.75 x 17.0 x 14.5 inches

Weight 6.4 kg (14 lbs)

Local Management

Channel LED indicators,

Channel Reset Button

Remote Management
RS232 Serial: Telnet

10/100BASE-T Ethernet: SSHv2,Telnet,SNMPv3


Alarm Management
SMTP, Email/SMS, Dry Alarm Contacts

Optical

1,2 or 4 Ports

Singlemode, Multimode 50um and 62.5 um

SC Duplex Connectors

Others Available On Request